Microcontroller User's Manual

26-12 MCF5282 User’s Manual MOTOROLA
Memory Map/Register Definition
PORTnP/SETn bits are described in Table 26-5.
26.3.2.4 Port Clear Output Data Registers (CLRn)
Clearing a CLRn register clears the corresponding bits in the PORTn register. Setting it has
no effect. Reading the CLRn register returns 0s.
Most PORTn registers have a full 8-bit implementation, as shown in Figure 26-14. The
remaining PORTn registers use fewer than eight bits. Their bit definitions are shown in
Figure 26-15, Figure 26-16, and Figure 26-17.
The CLRn registers are read/write accessible.
7 43210
Field — PORTnP3/
SETn3
PORTnP2/
SETn2
PORTnP1/
SETn1
PORTnP0/
SETn0
Reset 0000 Current Pin State
R/W: — R/W
Address IPSBAR + 0x10_0037 (PORTTCP/SETTC), 0x10_0038 (PORTTDP/SETTD), 0x10_0039
(PORTUAP/SETUA)
Figure 26-13. Port Pin Data/Set Data Registers (4-bit)
Table 26-5. PORTnP/SETn (8-bit, 6-bit, and 4-bit) Field Descriptions
Register Bits Name Description
8-bit 7–0 PORTxnP/SETxn Port x Pin Data/Set Data Bits
1 Port x pin state is 1 (read); set corresponding PORTx bit
(write)
0 Port x pin state is 0 (read)
7-bit 6–0
6-bit 5–0
4-bit 3–0
7-bit 7 — Reserved, should be cleared.
6-bit 7–6
4-bit 7–4
76543210
Field CLRn7CLRn6CLRn5CLRn4CLRn3CLRn2CLRn1CLRn0
Reset 0000_0000
R/W: R/W
Address IPSBAR + 0x10_003C (CLRA), 0x10_003D (CLRB), 003E (CLRC), 0x10_003F (CLRD), 0x10_0040
(CLRE), 0x10_0041 (CLRF), 0x10_0042 (CLRG), 0x10_0043 (CLRH), 0x10_0044 (CLRJ), 0x10_0045
(CLRDD), 0x10_0046 (CLREH), 0x10_0047 (CLREL)
Figure 26-14. Port Clear Output Data Registers (8-bit)