Microcontroller User's Manual

MOTOROLA Chapter 20. General Purpose Timer Modules (GPTA and GPTB) 20-7
Memory Map and Registers
20.5.4 GPT Output Compare 3 Data Register (GPTOC3D)
NOTE
A successful channel 3 output compare overrides any channel
2:0 compares. For each OC3M bit that is set, the output
compare action reflects the corresponding OC3D bit.
20.5.5 GPT Counter Register (GPTCNT)
Table 20-6. GPTOC3M Field Descriptions
Bit(s) Name Description
7–4 — Reserved, should be cleared.
3–0 OC3M Output compare 3 mask. Setting an OC3M bit configures the corresponding PORTTn
pin to be an output. OC3Mn makes the GPT port pin an output regardless of the data
direction bit when the pin is configured for output compare (IOSx = 1). The OC3Mn bits
do not change the state of the PORTTnDDR bits. These bits are read anytime, write
anytime.
1 Corresponding PORTTn pin configured as output
0 No effect
7430
Field — OC3D
Reset 0000_0000
R/W R/W
Address IPSBAR + 0x1A_0003, 0x1B_0003
Figure 20-5. GPT Output Compare 3 Data Register (GPTOC3D)
Table 20-7. GPTOC3D Field Descriptions
Bit(s) Name Description
7–4 — Reserved, should be cleared.
3–0 OC3D Output compare 3 data. When a successful channel 3 output compare occurs, these
bits transfer to the PORTTn data register if the corresponding OC3Mn bits are set.
These bits are read anytime, write anytime.
15 0
Field CNTR
Reset 0000_0000_0000_0000
R/W Read only
Address IPSBAR + 0x1A_0004, 0x1B_0004
Figure 20-6. GPT Counter Register (GPTCNT)