User manual

Monitor12 (MON12) User Manual 05/30/01
21
>TM Enter transparent mode.
. Host computer input
.
.
(CTRL)A Task completed. Enter exit command.
> Exit transparent mode.
Refer to the downloading procedures at the end of this chapter for
additional information pertaining to the use of the TM command.
VERIFY - VERIFY MEMORY AGAINST S RECORD
The VERIFY command is similar to the LOAD command except that the VERIFY command
instructs the EVB to compare the downloaded S-record data to the data stored in
memory.
EXAMPLES DESCRIPTION
>VERIFY Enter verify command.
Send S Record file from host now.
done Verification completed.
>
>VERIFY Enter verify command.
Send S record file from host now.
Mismatch encountered.
error addr E000 Error message displaying first byte
address.
Refer to the downloading procedures at the end of this chapter for additional
information pertaining to the use of the LOAD command.