User Guide
46
English
UTILITIES
POWER LEVEL
You can transmit your calls at different transmit
power levels. A higher level means you can reach a
radio that is farther away. A lower power level
reduces the possibility of interference. Use the high
power setting only when necessary.
You can switch between high and low power levels
by using a pre-programmed Power Level button or
via the menu.
Using the Power Level Button
1. Press the Power Level button to switch to high
power when the feature enable alert will
sound, the display icon H is lit and the display
will show:
2. Press the Power Level button again to switch
to low power when the feature disable alert
will sound, the display icon L is lit and the dis-
play will show:
Using the Menu
HI POWER
LOW PWR
1 Ensure radio is in IDLE STATE.
2 Short press on
C to enter menu
3 G
or
H until
4 Short press on C to select
5 G
or
H until:
6 Short press on C
to show current
status.
7 G
or
H
toggles High/Low
8 Long press on C
to select
9 Display shows:
(for 2 seconds)
10 Radio exits menu
mode and display
shows e.g.:
UTILS
PWR LVL
HIGH
LOW
LOW
SELECTED
CHAN 05