User Guide

45
English
UTILITIES
LONE WORKER
The Lone Worker feature enables you to work alone
with added safety. You can switch the feature On or
Off by using a pre-programmed Lone Worker
button, or via the menu.
Using the Lone Worker Button
1. Press the Lone Worker button to switch Lone
Worker on, when the feature enable alert will
sound and the display will show:
• If you have not pressed any buttons within a
programmed time, you will be reminded that
Lone Worker is switched on by a high pitched
alert tone (Lone Worker Reminder) being
sounded.
• Press any button to respond and cancel the
alert, if you do not the radio will enter the
Emergency state.
2. Press the Lone Worker button again to switch
Lone Worker off, when the feature disable alert
will sound and the display will show:
3. You may also switch off Lone Worker by chang-
ing the channel or switching radio off and on
again.
Using the Menu
LWKR ON
LWKR OFF
1 Ensure radio is in IDLE STATE.
2 Short press on
C to enter menu
3 G or H until
4 Short press on C to select
5 G or H until:
6 Short press on C
to show current
status.
7 G or H
toggles on/off
8 Long press on C
to select
9 Display shows:
(for 2 seconds)
10 Radio exits menu
mode and display
shows e.g.:
UTILS
LONE WKR
ON
OFF
OFF
SELECTED
CHAN 05