User Guide

English

UTILITIES

Deleting a Nuisance Channel

If a channel continually generates unwanted calls/

noise (a “nuisance” channel), you can temporarily

remove it from the scan list by performing a

Nuisance Channel Delete

operation:

1. While the radio is on the Nuisance Channel,

press the Nuisance Delete button until you

hear the scan start alert tone.

Note: You cannot perform a Nuisance Channel

Delete on a priority channel or if there is only

one remaining channel in the scan list.

Adding A Deleted Nuisance Channel Back

Into The Scan List

Using the Scan Button

1. Press the Scan button to stop scanning. The

scan stop alert tone will sound.

2. Press the Scan button again to re-start scan-

ning. The scan start alert tone will sound, and

the scan list will contain all

programmed channels.

Using the Menu

1. Follow the instructions for selecting Scan On/

Off via the menu

2. Select Scan Off. Your radio will stop scanning,

the scan stop alert tone will sound, the display

icon G and the LED indicator will be extin-

guished.

3. Select Scan On. Your radio will re-start scan-

ning, the scan start alert tone will sound, the

display icon G will be lit , the LED indicator

will blink green and the scan list will contain all

programmed channels.