User Guide

English

RADIO CALLS

Keypad Edit (keypad microphone only)

The direct access button from the keypad

microphone takes you to the List option only. The

last status sent from the list is displayed. Note that

the last multicall or keypad entry is not shown.

Note: If you enter an incorrect status, you must exit

the menu (either by selecting the present

entry or allowing the menu to time out), then

re-enter the status list via the programmed

button on the keypad microphone.

Once the desired status is displayed, there are three

methods to select the entry :

Method 1

Method 2

Method 3

Press the PTT button or Call 1-4 to select status and

make the call.

Call1-4 are pre-programmed call buttons.

1 Press Mic {, } or | whichever is

programmed as Status list /keypad entry.

2 The last selected

list entry is

displayed e.g.

3 Either G

until required entry

e.g..

or Enter status digits

directly on

microphone keypad

e.g.

STAT 01

STAT 03

5234

1 Long press on C To confirm selection

2 Display shows:

(for 2 seconds)

1 Press # on the

keypad

(if programmed)

To confirm selection

2 Display shows:

(for 2 seconds)

SELECTED