User Guide

English

RADIO CALLS

Keypad Edit (keypad microphone only)

The direct access button from the keypad

microphone takes you to the List option only. The

last person called from the list is displayed. Note

that the last multicall or keypad entry is not shown.

Note: If you enter an incorrect address, you must

exit the menu (either by selecting the present

entry or allowing the menu to time out), then

re-enter the contact list via the programmed

button on the keypad microphone.

Once the desired name or address is displayed,

there are three methods to select the entry :

Method 1

Method 2

Method 3

Press the PTT button or Call 1-4 to select address

and make the call.

Call1-4 are pre-programmed call buttons.

1 Press Mic {, } or | whichever is

programmed as Contact list /keypad entry.

2 The last selected list

entry is displayed

e.g.

3 Either G

until required entry

e.g..

or Enter address digits

directly on

microphone keypad

e.g.

JOHN

PHIL

5234

1 Long press on C To confirm selection

2 Display shows:

(for 2 seconds)

1 Press # on the

keypad

(if programmed)

To confirm selection

2 Display shows:

(for 2 seconds)

SELECTED