Specifications

Memory Power Macintosh - 1 6
Power Macintosh
7600 Series
The Power Macintosh 7600
has no DRAM soldered onto
the logic board. You can
expand the amount of memory
to a total of 512 MB using 5-
volt, 64-bit-wide, 168-pin
fast-paged mode or EDO
DIMMs.
B4 slot
B3 slot
B2 slot
B1 slot
A4 slot
A3 slot
A2 slot
A1 slot
(front of
computer)
Memory Information
DRAM Speed 70 ns
DIMM Type +5V 168-pin
Soldered DRAM None
Number of DIMM Slots 8
Supported Sizes in MB 4, 8, 16, 32, 64
Maximum DRAM 512 MB
Virtual Memory 1 GB
Soldered VRAM None
Number of VRAM Slots 4
Note: DRAM DIMMs can be installed
individually; however, to provide maximum
performance, install the DIMMs in matching
pairs and in paired slots (A4 and B4 first,
then A3 and B3, etc.).
Note: The Single In-Line Memory Modules
(SIMMs) used in previous Macintosh models
are NOT compatible with the Power
Macintosh 7600. This computer supports
+5V DIMMs only.
Note: The Power Macintosh 7600 does not
have any main memory soldered to the logic
board. At least one DRAM DIMM must be
installed for the computer to operate.
DRAM Configurations
16 or
32 MB
The Power Macintosh 7600
logic board has 16 or 32 MB of
installed DRAM.
Up to
512 MB
Use 4, 8, 16, 32, or 64 MB
168-pin DIMMs.