Specifications

Memory Macintosh LC - 2
Macintosh LC II
The LC II has 2 MB or 4 MB of
soldered DRAM. You can
expand the memory to a total
of 10 MB by installing DRAM
SIMMs.
You must fill both slots with
matching SIMMs when
upgrading memory.
Note: The LC II has no VRAM soldered to the
logic board. It comes with a 256K VRAM
SIMM installed and can be upgraded to 512K
by replacing the 256K SIMM with a 512K
SIMM that is 100 ns or faster.
Memory Information
DRAM Speed 100 ns
SIMM Type 30-pin
Soldered DRAM 4 MB
Number of SIMM Slots 2
Supported Sizes in MB 1, 2, 4
Maximum DRAM 10 MB
Virtual Memory 1 GB
Soldered VRAM None
Number of VRAM Slots 1
Note: The Macintosh LC II can address a
maximum of 10 MB of DRAM. When you
install 4 MB SIMMs, the lower 2 MB of
memory on the logic board can't be addressed.
DRAM Configurations
2/4 MB The Macintosh LC II has either
2 MB or 4 MB of soldered
DRAM.
4/6 MB Install two 1 MB SIMMs.
6/8 MB Install two 2 MB SIMMs.
10/12
MB
Install two 4 MB SIMMs.
VRAM Configurations
256K Install one 256K VRAM SIMM.
512K Install one 512K VRAM SIMM.