Specifications

Memory PC/DOS Compatible Cards - 1
DOS Compatibility
Card
The DOS Compatibility Card
has no DRAM soldered onto
the card.
You can expand the amount of
memory to a total of 32 MB
by installing a DRAM SIMM
on the card.
Virtual Memory Note: Apple recommends
you turn off Apple or third-party virtual
memory when using this card.
Memory Information
DRAM Speed 80 ns
SIMM Type 72-pin, non-
composite
Soldered DRAM None
Number of SIMM Slots 1
Supported Sizes in MB 4, 8, 16, 32
Maximum DRAM 32 MB
Virtual Memory (See Note)
Soldered Video RAM 512K
Number of Video RAM
Slots
none
Note: This computer does not have any main
memory soldered to the logic board. If no
DRAM SIMM is installed, the card
automatically shares memory with the logic
board. The amount of memory allocated to the
DOS Compatibility Card is set using the PC
Setup control panel.
DRAM Configurations
0 MB The DOS Compatibility Card
comes with no installed DRAM.
Up to
32 MB
Use 4, 8, 16, or 32 MB
72-pin SIMM.