Specifications

Memory Laser Printers - 17
LaserWriter 8500
The LaserWriter 8500
comes with 16 MB of RAM
soldered onto the I/O
controller board. There is one
SIMM slot for installing
additional RAM.
Note: The 16 MB SIMMs must have a 2 KB
row (11 bit x 11 bit) refresh configuration.
Any 16 MB SIMMs with a 4 KB row (10 bit
x 12 bit) refresh configuration are not
compatible with this printer.
Memory Information
DRAM Speed 70 ns
SIMM Type 72-pin
Soldered DRAM 16 MB
Expansion Sockets 1
Supported Sizes in MB 4, 8, 16, 32
Maximum DRAM 48 MB
Note: To use duplex printing and PhotoGrade
features at the same time requires 20 MB
minimum.
DRAM Configurations
20 MB Install one 4 MB SIMM.
24 MB Install one 8 MB SIMM.
32 MB Install one 16 MB SIMM.
48 MB Install one 32 MB SIMM.