Specifications

Memory Laser Printers - 11
LaserWriter
16/600 PS
The LaserWriter 16/600 PS
has no soldered DRAM. You
can expand the memory to a
total of 32 MB.
Note: The 16 MB SIMMs must have a 2 KB
row (11 bit x 11 bit) refresh configuration.
Any 16 MB SIMMs with a 4 KB row (10 bit
x 12 bit) refresh configuration are not
compatible with this printer.
Memory Information
DRAM Speed 80 ns
SIMM Type 72-pin
Soldered DRAM none
Expansion Sockets 2
Supported Sizes in MB 4, 6, 8
Maximum DRAM 32 MB
Note: 8 MB of DRAM is the standard
configuration shipped from Apple.
Note: 12 MB of DRAM is the standard
configuration for enabling PhotoGrade.
Note: The 24 MB configuration requires
moving the base 8MB SIMM from the left to
the right SIMM slot. Due to space constraints,
the left SIMM should always be installed
before the right SIMM.
Note: The 32 MB configuration requires
that you remove the standard 8 MB SIMM.
DRAM Configurations
Total
Memory
Install in
Slot BA
Install in
Slot DC
8 MB 8 MB Empty
12 MB 8 MB 4 MB
16 MB 8 MB 8 MB
24 MB 16 MB 8 MB
32 MB 16 MB 16 MB