Specifications

Memory WorkGroup Servers - 11
Workgroup Server
9650
The Workgroup Server 9650
logic boards do not have any
soldered DRAM. At least one
DRAM DIMM must be
installed for the computer to
operate.
You can expand the memory to
a total of 768 MB using 5-
volt, 64-bit-wide, 168-pin
fast-paged mode or EDO
DIMMs.
DRAM DIMM slots
B6 slot
B5 slot
B4 slot
B3 slot
B2 slot
B1 slot
A6 slot
A5 slot
A4 slot
A3 slot
A2 slot
A1 slot
.
Memory Information
DRAM Speed 70 ns
DIMM Type 168-pin
Soldered DRAM None
Number of DIMM Slots 12
Supported Sizes in MB 4, 8, 16, 32,
64
Maximum DRAM 768 MB
Virtual Memory 1 GB
Soldered VRAM See VRAM Note
Number of VRAM Slots See VRAM Note
Cache DIMM Slot No
Note: DRAM DIMMs can be installed
individually; however, to provide maximum
performance, install the DIMMs in matching
pairs and in paired slots (A4 and B4 first,
then A3 and B3, etc.).
Note: The Single In-Line Memory Modules
(SIMMs) used in previous Macintosh models
are NOT compatible with the Workgroup
Server 9650. This computer supports +5V
DIMMs only.
VRAM Note: The Workgroup Server 9650
comes standard with 4 MB of VRAM on the
video card. There is no VRAM soldered on the
logic board and no VRAM slots are on the logic
board.
See additional notes on the following
DRAM Configurations
64 MB The Workgroup Server 9650
logic boards have 64 MB of
installed DRAM.
Up to
768 MB
Use 4, 8, 16, 32, or 64 MB
168-pin DIMMs.