Specifications

Memory WorkGroup Servers - 10
Workgroup Server
7350
The Workgroup Server 7350
computer has no DRAM
soldered onto the logic board.
You can expand the amount of
memory to a total of 512 MB
using 5-volt, 64-bit-wide,
168-pin fast-paged mode or
EDO DIMMs.
B4 slot
B3 slot
B2 slot
B1 slot
A4 slot
A3 slot
A2 slot
A1 slot
(front of
computer)
Memory Information
DRAM Speed 70 ns
DIMM Type +5V 168-pin
Soldered DRAM None
Number of DIMM Slots 8
Supported Sizes in MB 4, 8, 16, 32,
64
Maximum DRAM 512 MB
Virtual Memory 1 GB
Soldered VRAM None
Number of VRAM Slots 4
Note: DRAM DIMMs can be installed
individually; however, to provide maximum
performance, install the DIMMs in matching
pairs and in paired slots (A4 and B4 first,
then A3 and B3, etc.).
Note: The Single In-Line Memory Modules
(SIMMs) used in previous Macintosh models
are NOT compatible with the Workgroup
Server 7350. This computer supports +5V
DIMMs only.
Note: These computers do not have any main
memory soldered to the logic board. At least
one DRAM DIMM must be installed for the
computer to operate.
DRAM Configurations
48 MB The Workgroup Server 7350
logic boards have 48 MB of
installed DRAM.
Up to
512 MB
Use 4, 8, 16, 32, or 64 MB
168-pin DIMMs.