User guide

Advanced settings 33
8.11 Default settings 8.12 Auto prefix
You can set the CD2 to detect a dialling number and replace
it with another number. The number to be detected can be
up to 5 digits long. It can be replaced with a number up to 10
digits.
1. Press m, scroll d to ADVANCED SET and press m.
2. Scroll d to PREFIX . Press m.
3. DETECT DIGIT is displayed. Press m.
4. Enter the number you want to be detected and press
m.
5. Scroll to PREFIX NUM . and press m.
6. Enter the number you want it replaced with and press
m.
7. Press > to return to standby.
8.13 Country
If you move to another country you can set your phone to be
compatible with the network settings of that country.
NOTE
If you make a mistake during welcome mode country
selection, you can also reset your country.
Depending on your country, this option may be displayed as
NOT AVAIL or you country may not be displayed.
Handset name Handset
Key tone On
First ring On
Auto pick up On
Auto hang up On
Ringer melody Melody 1
Ringer volume High
Base ringer melody Melody 2
Base ringer volume High
Earpiece volume 2
Phonebook Unchanged
Calls list Empty
Redial list Empty
Master PIN 0000
Keypad lock Off
Clock 00:00
Alarm Off
Dial mode Tone
Recall mode Long (600ms)