User guide

32 Advanced settings
3. SELECT BASE is displayed. Press m.
The available bases are displayed with the current base
number flashing.
4. Enter the number of the base you want – 1,2,3 or 4 and
press
m.
When the base is found you hear a beep. If not found,
the display shows
UNREGISTERED .
8.8 Unregister a handset
1. Press m and scroll d to ADVANCED SET and press
m.
2. Scroll d to UNREGISTER and press m.
3. Enter the 4 digit master PIN and press m.
Display shows the registered handset numbers.
4. Scroll u or d to select the handset you want to delete
and press
m.
UNREGISTERED is displayed on the handset screen.
8.9 PIN
The 4-digit master PIN is used when registering or
unregistering a handset and when changing some settings
on your CD2. The default setting is 0000. You can change
this PIN for more security.
1. Press m, scroll d to ADVANCED SET and press m.
2. Scroll d to PIN . Press m.
3. Enter the current 4 digit master PIN and press m.
(Default setting 0000).
4. Enter the new PIN and press m.
NOTE
Make a note of your PIN. If you forget your PIN you will need
to reset your product.
8.10 Reset
This will reset your CD2 to its default settings.
1. Press m, scroll d to ADVANCED SET and press m.
2. Scroll d to RESET UNIT . Press m.
3. CONFIRM? is displayed. Press m.
NOTE
Entries stored in the phonebook are retained. After reset,
depending on your country, the welcome mode setting may
be shown on the handset display.