User`s guide

SNMP MIB Support
The reference design has support for SNMP v2. The SNMP agents WILL be accessible through SNMP
manager applications such as HP Open View, MIB browsers. The SNMP agent WILL support read-write, read
only or disabled modes. The following are the supported SNMP MIBs.
MIB Name Description Supported
BRIDGE Module for managing devices supporting
802.1D
.1.3.6.1.2.17
IEEE802dot11 Standard MIB for 802.11 devices and includes
entities for station management, MAC and PHY
settings.
.1.2.840.10036
IF-MIB MIB module for managing objects for network
interface sub-layers. This is an updated version
of the MIB-II Table.
.1.3.6.1.2.1.2.2.1.1
IP-FORWARD-MIB Module for managing CIDR multipath routes .1.3.6.1.2.1.4.24
IP-MIB MIB for managing IP and ICMP
implementations, excluding the management of
IP routes.
.1.3.6.1.2.1.4 (IP)
.1.3.1.6.2.1.5 (ICMP)
.1.3.1.6.2.1.48
XXX-DOT11EXT2-MIB Vendor specific extensions to the standard
802.11 MIB for additional station management
objects, association table, enhanced security,
neighboring BSSs.
.1.3.6.1.4.1.yyy.3
SNMPv2-MIB MIB module for managing SNMPv2 entities. .1.3.6.1.6.3.x
TCP-MIB MIB module for managing TCP
implementations.
.1.3.6.1.2.1.6
UDP-MIB MIB module for managing UDP
implementations.
.1.3.6.1.2.1.7
SBL-MIB Motorola-specific MIB information to be
implemented