User`s guide

Administrative Options 5-5
5.3 Importing or Exporting the Configuration File
A CB3000 configuration file can be saved and downloaded (exported) to be used later for importing to other
CB3000 units, or to restore a CB3000 temporarily reset to factory defaults. Using the file-based configuration
feature speeds up the setup process at sites using multiple CB3000s.
To create an import-able/export-able CB3000 configuration file, select Tools > Configuration File from the
CB3000 menu tree. The Config Import/Export screen displays.
Imports or exports can be conducted using either FTP or HTTP. FTP is useful for remote accessibility of
configuration files not located with the CB3000, but on an accessible FTP server. HTTP is useful to import/
export configuration files locally. Refer to the following depending on your import/export requirements.
• Using FTP
• Using HTTP
5.3.1 Using FTP
To import or export a CB3000 configuration file using an FTP server:
1. Select Tools > Configuration File Settings from the CB3000 menu tree. The Config Import/Export
screen displays. If using FTP, only the top panel of the screen is used.
NOTE: When updating firmware from a FTP/TFTP server, provide the path to the
file relative to the root folder on the FTP/TFTP server. For example, if the image file
is located in the folder "CB3000\images" under the FTP/TFTP server's root folder,
enter "/CB3000/images/" in the File Path field.
NOTE: If the image file is located in the FTP/TFTP root directory, leave the File
Path field blank.