User`s guide

Network Configuration 3-11
For more details on encryption types, pros and cons of different encryption types and required configuration
parameters, see the Wi-Fi Alliance Web site at:
http://www.wifialliance.org/knowledge_center_overview.php.
To configure WPA1 (TKIP) security settings:
1. Select Settings > Wireless Settings > Security from the CB3000 menu tree.
2. Select WPA1
from the Security Mode drop-down menu.
Figure 3.5 WPA1 Configuration
3. Select a WPA1 Type of either WPA1 Personal or WPA1 Enterprise.
NOTE: Only ‘Open’ and ‘WPA’ security settings are available for the Ad-hoc (Peer-
to-Peer) network mode. Infrastructure (AP) network mode supports all the different
security settings.
WPA1 Personal In this mode, a pre-shared key (password) is used for authentication.
WPA1 Enterprise In this mode, authentication is achieved via 802.1X and Extensible
Authentication Protocol (EAP).