User`s guide

3-6 CB3000 Client Bridge User’s Guide
• Click the ‘View’ Available Networks link to view the available networks first, if unsure of the
network options.
• Data Rate – See step 4 for more details on configuring the data rate.
4. To set data rates for the ad hoc configured CB3000, click the Data Rate button. The Set Data Rates
screen displays.
NOTE: The CB3000 must already be configured to run in ad hoc mode in order to
set data rates. If the unit is configured for infrastructure mode, the Data Rate
button is disabled.
NOTE: To change the mode in which the CB3000 Client Bridge runs, select the
appropriate mode from the Network Mode drop-down and click apply.