User`s guide

Getting Started 2-11
3. Refer to the Antenna Gain parameter.
Information the CB3000 derives from the antenna look-up table is based on the antenna the user selects.
The antenna gain parameter is read-only with no user editable values.
If the user selects any antenna except ‘Other’, the gain value cannot be modified. If the user selects
‘Other’, the text entry field is blank and the user must enter a gain value. The gain is a positive value with
no more than 1 decimal place.
4. Refer to the Additional System Loss parameter.
If the user selects any antenna except ‘Other’, the loss value cannot be modified. If the user selects
‘Other’ then the text entry field is blank and the user must enter a loss value.
5. Click Apply to save the settings. The CB3000 is now ready to have its default configuration modified to
suit the requirements of its intended operation environment.