User`s guide

Getting Started 2-5
To run the Discovery Tool:
1. Locate the Discovery Tool (discover.exe) on the CB3000 CD and copy it to a desktop on the same network
as the CB3000 you wish to access.
2. Double-click on the discover.exe file to launch the utility, and run a network scan. The scan starts
immediately; when or if a CB3000 unit is discovered, a screen similar to Figure 2.3 is displayed.
Figure 2.3 Discovery Tool User Interface
3. Click on the IP address of the CB3000 you wish to log into.
4. A Security Alert dialog box displays. Click Yes to proceed.
Figure 2.4 Security Alert Dialog Box
5. A CB3000 Login dialog box displays. Enter a username and password to log onto the CB3000 console.
The default username and password are “admin” and “symbol” respectively.
NOTE: If the subnet of the PC where the tool is run is different from the current ip-
address of the CB3000, a window displays with the option to change the IP
address of the Client Bridge. This is password protected (use admin/symbol). To
know how to change the IP address for a CB3000, refer Changing the IP address for
a new Client Bridge on page 2-6.