User`s guide

Getting Started
Before installing the CB3000 Client Bridge, review the installation guidelines in the following sections:
• Basic Requirements
• Verifying the Package Contents
• Observing Placement and Range Guidelines
• Cabling the CB3000
• Logging into the CB3000
• Viewing CB3000 Information
• CB3000 Antenna Settings
2.1 Basic Requirements
The following hardware and software resources are required to install and operate a CB3000:
• Networked PC to be used during device configuration. The PC must have an RJ-45 Ethernet port and a
CDROM drive. The PC must be running the following:
• Windows 2000 or XP operating system
• Microsoft Internet Explorer 5.0 or later, or Netscape Navigator 6.0 or later
• An access point (for infrastructure mode operation) or a networked client (for Ad-hoc peer-to-peer mode
operation).
2.2 Verifying the Package Contents
Before installing the CB3000, verify that the package contains the following components:
• CB3000 Installation Guide
• CB3000 Software and Documentation CDROM
• CB3000 Client Bridge with integrated radio
• Ethernet cable
• Power adapter
• Single detachable omni-pole antenna
• Mounting hardware