Specifications

4
1. Screw the antenna clockwise onto the antenna connector on the rear of the CB3000.
2. Attach one end of an Ethernet cable to a RJ-45 jack on a computer or hub.
3. Connect the other end of the Ethernet cable to the LAN connector on the rear of
the CB3000.
4. Plug the power adapter into the DC-IN connector on the rear of the CB3000.
5. Connect the plug end of the power adapter into a power outlet.
The power adapter automatically selects and adjusts the power for the appropriate voltage
for worldwide use.
NOTE The back of the CB3000 also contains a Kensington lock mechanism for
attaching the CB3000 to an immovable objects in order to prevent theft.
CAUTION Only use the power adapter supplied by Symbol with the CB3000.
Using an incorrect power adapter could damage the CB3000 and void
the product warranty.
NOTE The CB3000 can use either a crossover or straight through cable.
!