Specifications

20
Testing Device Connectivity
The CB3000 Web interface has a Troubleshooting screen with an ICMP Ping Test function. For the
purposes of completing the CB3000 basic configuration and connection verification, this screen will
be used to ping the CB3000’s associated device. To test CB3000 device connectivity:
1. Select Tools -> Troubleshooting from the CB3000 menu tree.
2. The CB3000 can verify its link with an associated access point by sending ping packets to
the device. To conduct a ping test:
a. Enter the IP address of the target device.
b. Specify the length of each data packet transmitted to the target device during the ping
test. This value is defined in bytes (The default is 32 bytes).
c. Specify the number of ping packets to transmit (Symbol recommends 4 packets).