Specifications

CB3000 Client Bridge Install Guide

5. Click Yes to continue.

6. Enter a default user name of admin and a default password of symbol. Click OK.

The

Information screen displays high level device name and network address information.

The page is read-only with no configurable data fields. The CB3000 is now ready to have its

WLAN settings configured, then its Ethernet Settings. For more information, see

Configuring CB3000 WLAN Settings on page -12 and

Configuring CB3000 Ethernet Settings on page -15.

Tips for Using the Discovery Tool

Symbol recommends adhering to the following when using the Discovery Tool:

• If a VPN client is running on the same computer from which the Discovery Tool is run, the

scan may fail.

• The PC’s Ethernet port requires a valid IP address for the scan to be effective.

• Set the Ethernet port to 100Mb/full duplex on the computer (from which the Discovery Tool

is run) if the scan does not display the CB3000 after changing the IP address from the

Discovery Tool.