Specifications

CB3000 Client Bridge Install Guide

Configuring CB3000 WLAN Settings on page -12 and

Configuring CB3000 Ethernet Settings on page -15.

Connecting to the User Interface Using the Discovery Tool

Use the Symbol Discovery Tool to locate and identify CB3000s. In addition, you can double-click a

located device within the Discovery Tool window to launch the Web interface. After power-up, the

CB3000 sends a request for an IP address or broadcasts a DHCP request. If the CB3000 does not

receive a reply within 20 seconds, it uses a default IP address of 10.10.1.1.

The Discovery Tool is available on the CB3000 product CDROM and the Symbol Support Website.

To launch and use the CB3000 Discovery Tool:

1. Insert the CB3000 Software and Documentation CDROM or download and launch the

CB3000 Software and Documentation image from the Symbol Web Site. Go to

http://www.symbol.com/services/downloads

to download the image.

2. Accept the terms Symbol Technologies Inc. End User License Agreement once the CB3000

flash menu displays.

3. Select the CB3000 Discovery Tool menu item.