Install guide

Configuring CB3000 Ethernet Settings 2-11
Configuring CB3000 Ethernet Settings
Use the Ethernet Settings screen to specify the name of the CB3000 and assign network address information
required as part of the CB3000 basic configuration:
To configure required Ethernet settings for the CB3000:
1. Select Settings -> Ethernet Settings
from the CB3000 menu tree.
2. Configure the Ethernet Settings
screen to assign a device name and set network address information
the CB3000 uses.
Device Name Specify a device name for the CB3000. Motorola recommends selecting a name
serving as a reminder of the user base the CB3000 supports (engineering, retail
etc.).
DHCP Select the Obtain an IP address automatically option if the CB3000 will use
a DHCP server to obtain an IP address. By default, Bootp for DHCP Discover is
set to Broadcast.
Use the Unicast option for Bootp for DHCP Discover if you have issues using
the Broadcast options with some DHCP servers.
Select the Use the following IP Address option if an IP address is entered
manually (static) for the CB3000.
IP Address The IP Address refers to the address other devices use to address the CB3000.
Subnet Mask A subnet mask accompanies an IP address and the two values work together.
Applying the subnet mask to an IP address splits the address into two parts, an
“extended network address” and a host address.