Install guide

Configuring CB3000 WLAN Settings 2-9
To configure CB3000 communication settings:
1. Select Settings -> Wireless Settings -> WLAN Settings
from the CB3000 menu tree.
2. Select a network (operating) mode for the CB3000.
3. Select an ESSID (network) for CB3000 connection.
Network Mode Select either Infrastructure (AP) or Ad-hoc (Peer-to-Peer).
Select Infrastructure (AP), to enable the CB3000 to transmit and
receive with an access point within the CB3000’s subnet.
ESSID (Wireless
LAN Service Area)
The following options are available for CB3000 network
connection:
Select Attach to any ESSID automatically to enable the
CB3000 to randomly select a target ESSID for connection.
Select the Specify the ESSID option to manually enter the name
of the target ESSID or use the drop-down menu to select the
ESSID. The list of ESSIDs available to the CB3000 from the drop-
down menu does not automatically refresh as devices come and
go from range of the CB3000.