User guide

45 Mbps Backhaul User Guide
Issue 3, December 2004 Page 78 of 113
normal operation
reset will take place
Reset Switch
Pressed and held for
> 20 seconds during
normal operation
On
Off while switch pressed.
One second after release, flashes twice per
second regularly for 10 seconds, then erases
non-volatile configuration data and resets.
The erasure will reset all the unit's
configuration apart from the last known
wireless link configuration, this ensures that
after a reset the wireless link SHOULD re-
establish without any user intervention.
The IP address will be reset to 10.10.10.10
Reset Switch
Pressed and held for
>40 seconds from
power on (Reset is
pressed while power
is applied)
On
Off while switch pressed.
One second after release, flashes twice per
second regularly for 10 seconds, then erases
non-volatile configuration data & the
downloaded image and resets.
The erasure will reset all the unit's
configuration apart from the last known
wireless link configuration, this ensures that
after a reset the wireless link SHOULD re-
establish without any user intervention.
The IP address will be reset to 10.10.10.10
and the unit will boot the fixed software
image.