User guide

45 Mbps Backhaul User Guide
Issue 3, December 2004 Page 68 of 113
For a copy of the Motorola proprietary MIB RFC please visit the Motorola website.
6.3.8.1.2 SNMP Configuration
SNMP State The SNMP state attribute controls the creation of the SNMP features. Changing the SNMP state
attribute requires a mandatory reboot of the unit. Only when the SNMP state is enabled at system start-up will
the SNMP processor task be created.
SNMP Enabled Traps The SNMP Enabled Traps attribute controls which SNMP Traps the unit will send.
SNMP Community String The SNMP community string acts like a password between the networks SNMP
management entity and the distributed SNMP clients (45 Mbps Backhaul units). Only if the community string is
configured correctly on all SNMP entities can the flow of management information take place. By convention
the default value is set to ‘public’. When the community string is changed the system requires a mandatory
reboot before the new string or phrase is adopted.