User guide

45 Mbps Backhaul User Guide
Issue 3, December 2004 Page 50 of 113
6.3.3.5 Disarm
Step 5 of the installation wizard is the disarm phase.
Figure 21 Disarm Installation.
Once section 5.7.9 “Aligning the ODUs” is complete pressing the “Disarm Installation Agent” button completes
the installation process and the audible installation tone will be switched off. If the installer wishes to modify
the installation configuration then the ‘Back’ link can be used to access the installation wizard steps described
above.
After disarming the wireless link the use is presented with an optional configuration page see Figure 25. The
screen presents hyper links to the main configuration and spectrum management pages.