User guide

45 Mbps Backhaul User Guide

Issue 3, December 2004 Page 25 of 113

Step 1: Assemble the cable as described

in 5.7.1

Step 2: Insert the RJ45 connector making

sure that the locking tab snaps home

Step 3: Screw in the body of the weather

proofing gland and tighten

Step 4: Screw on the clamping nut and

tighten

Should it be necessary to disconnect the PIDU to ODU cable at the ODU this can be achieved by removing the

weather proofing gland and depressing the RJ45 locking tab with a small screwdriver as shown below: