User guide

45 Mbps Backhaul User Guide
Issue 3, December 2004 Page 23 of 113
Step 1: Mount one half of the bracket to the
wall.
Step 2: Mate the two halves of the bracket
together and tighten the nut and bolt.
5.7 Connecting Up
5.7.1 Preparing The Cable — RJ45 connections
Cable can be purchased from your reseller or distributor. (Note that the maximum length between the PIDU and
ODU is 100m.) Those wishing to source their own cables and connectors (see section 1.3.4 “Cables and
Connectors”) should use the following instructions along with the cable and connector suppliers instructions.
Important! The cable must be threaded through the weatherproofing gland before crimping on the RJ-45
connector. An RJ-45 connector will not fit through the clamping ring of the weatherproofing gland.
Step 1: Assemble weatherproofing gland on
cable as shown
Step 2: Strip the outer insulation