User guide

Understanding Canopy Networks March 2005
Through Software Release 6.1
Issue 1 Page 87 of 425
Canopy System User Guide
6. Double-click on the license key filename.
RESULT: The key loads into the module.
7. Open the Configuration web page of the module.
8. Review parameter settings and enable the feature if you wish to do so at this
time (see next section).
end of procedure
10.2 ENABLING FEATURES
A Canopy feature is enabled (functioning) if the feature is both active and enabled. For
example, Transmit Frame Spreading is active (can be enabled) in any AP or BHM that
operates on Release 4.0 or a later release. However, Transmit Frame Spreading
functions only if the Enable selection for the Transmit Frame Spreading parameter is
checked in the Configuration web page of the module.