User guide

March 2005 Understanding Canopy Networks
Through Software Release 6.1
Page 86 of 425 Issue 1
Canopy System User Guide
Category of Improvement
Feature Name
Initial
Software
Release
Cost Efficiency Fix Flexibility Installation Interference Security Throughput Troubleshooting
900-MHz Module Spectrum Analyzer in AP
6.0
● ●
Spectrum Analyzer in AP
6.1
● ●
Suspend or reinstate SM through the BAM GUI
BAM 2.0
●
GPS Sync Protection
3.1.5
●
Extended Network with Sync
4.0
● ● ●
Telnet Commands Defined
4.2.1
● ●
900-MHz Module Hardware Scheduler Increased
Throughput
6.0
●
Increased Throughput with Hardware Scheduler
6.1
●
Time & Date for APs or BHMs Connected to
CMMmicro
4.2.1 and
CMMmicro
2.1
●
VLAN (802.1Q)
6.1
● ●
Web Pages Remain Scrolled
4.2.1
●
10.1 ACTIVATING FEATURES
A Canopy feature is active if the software that allows the feature to be turned on or off
(enabled or disabled) is present.
10.1.1 Fixed License Keys
Some features are activated by loading a fixed license key into the radio. Such a key
arrives from Motorola as a filename.url file. When you double-click on this file, your
browser opens and the location bar is populated by a lengthy string. This URL string
begins with http://<ModuleIPAddress>/. If you need to load a key into a module whose IP
address has changed since Motorola issued the key, perform the following steps.
Procedure 1: Modifying a fixed license key for a module IP address
1. Right-click on the license key filename.
2. Select Properties.
3. Select the Web Document tab.
4. At URL, substitute the current IP address for the original IP address in the URL.
5. Click OK.