User guide

Understanding Canopy Networks March 2005
Through Software Release 6.1
Issue 1 Page 57 of 425
Canopy System User Guide
You cannot change the encryption basis (from DES to AES, for example), but you can
enable or disable the encryption.
Module Type
The next two alpha characters indicate the module type. For example, CK indicates that
the module is a Cluster Management Module.
↓
1008CK
The module type cannot be changed.
Reflector Added
In specifications tables and price lists, the trailing characters RF or RF20 indicate that the
associated information applies to the module being
◦ mounted to the 27RD Passive Reflector Dish, in the case of specifications.
◦ ordered with the 27RD Passive Reflector Dish, in the case of price lists.
↓
2 400BHRF20
However, this designation is not shown on either label of the module, and a module
ordered with the dish can be deployed without the dish.
Modulation Capability
A trailing 20 indicates that the module is capable of being set to either
◦ 20-Mbps modulation (aggregate throughput of 14 Mbps)
◦ 10-Mbps modulation (aggregate throughput of 7 Mbps).
↓
2 400BHRF20
The absence of a trailing 20 indicates that the module is capable of only 10-Mbps
modulation.
6.2 INTERPRETING SERIAL NUMBER
The label shown in Figure 19 on Page 55 contains a serial number that is indicated by
S/N. This is the Canopy product serial number. This number could be significant in your
dealings with Motorola or your supply chain.