User guide

March 2005 Canopy System Reference Information
Through Software Release 6.1
Page 394 of 425 Issue 1
Canopy System User Guide
Command System help Definition Notes
ls
List the contents of a
directory
Syntax: ls. Lists the file names of all files in
the directory.
Syntax: ls –l. Displays additional
information, such as the sizes and dates of
the files.
lsweb
List Flash Web files
Syntax: lsweb. Lists the file names of the
saved custom web files.
ping
Send ICMP ECHO_REQUEST
packets to network hosts
Syntax: ping IPaddress. Sends an ICMP
ECHO_REQUEST to IPaddress and waits
for a response. If a response is received, the
system returns IPaddress is alive.
If no response is received, the system returns
no answer from IPaddress.
reset
Reboot the unit
Syntax: reset. Forces the module to perform
a hard (FPGA and CPU) module reset. (See
fpga_conf.)
rm
Remove (unlink) files
Syntax: rm filename. Remove filename.
syslog
Display system event log:
syslog <optional
filename>
Syntax: syslog. Displays the contents of the
system log. Syntax: syslog filename.
Saves the contents of the system log to
filename. Caution: overwrites filename if
it already exists.
telnet
Telnet application
Syntax: telnet hostIPaddress.
Launches the telnet client application on the
Canopy module.
tftp
tftp application
Syntax: tftp hostIPaddress. Launches
the tftp client application on the Canopy
module.
update
Enable automatic SM code
updating
Syntax: update actionlist.txt.
Enables the automated update procedure that
actionlist.txt specifies. (Supported for
only the Access Point Module.)
updateoff
Disable automatic SM
code updating
Syntax: updateoff. Disables the
automated update procedure.
version
Display the software
version string
Syntax: version. Displays the module
version string, which contains the
software/firmware/hardware versions, the
module type, and the operating
frequency.