User guide

Managing Your Canopy Network March 2005
Through Software Release 6.1
Issue 1 Page 389 of 425
Canopy System User Guide
◦ Frequency:
◦ Color code:
◦ IP address:
◦ Downlink/uplink ratio:
◦ Max range:
◦ Bridge entry timeout:
◦ Number of subscribers:
◦ Method of synchronization:
14. If you selected Figure 35
a. Indicate how many APs are in each cluster.
b. Indicate how many AP clusters are deployed (and what types).
c. Indicate how many BH links are configured.
d. Include the IP addresses.
e. Indicate the frequency for each sector.
f. Indicate the type of synchronization.
g. Indicate how much separation exists between clusters and BHs.
h. Indicate the types of BH links (10-Mbps or 20-Mbps).
i. Distances of links.
j. Frequency used by each BH.
k. For each AP and BHM, collect the following additional information:
◦ Sector number:
◦ SW release:
◦ Frequency:
◦ Color code:
◦ IP address:
◦ Downlink/uplink ratio:
◦ Max range:
◦ Bridge entry timeout:
◦ Number of subscribers:
◦ Method of synchronization:
15. If you selected Figure 36, collect the following additional information:
◦ Sector number:
◦ SW release:
◦ Frequency:
◦ Color code:
◦ IP address:
◦ Downlink/uplink ratio:
◦ Max range:
◦ Bridge entry timeout:
◦ Number of subscribers: