User guide

March 2005 Managing Your Canopy Network
Through Software Release 6.1
Page 374 of 425 Issue 1
Canopy System User Guide
When you stop the packet capture, the <capture> - Ethereal window opens, as shown in
Figure 146. This window has three panes:
◦ The top pane provides a sequenced summary of the packets captured and
includes SRC/DEST address and type of protocol. What you select in this pane
determines the additional information that is displayed in the lower two panes.
◦ The lower two panes facilitate drill-down into the packet that you selected in the
top pane.
In this example, Packet 1 (a broadcast ARP request) was selected in the top pane. The
lower two panes provide further details about Packet 1.
Figure 146: <capture> - Ethereal window, Packet 1 selected