User guide

Managing Your Canopy Network March 2005
Through Software Release 6.1
Issue 1 Page 373 of 425
Canopy System User Guide
The Ethereal Capture window opens, as shown in Figure 145. This window graphically
displays the types of packets (by percentage) that are being captured. If all packet types
are displayed with 0%, either
◦ launch your Web browser on the subscriber PC for the IP address of the SM
◦ ping the SM from the home PC.
If still all packet types are displayed with 0%, don’t see any traffic being captured,
reconfigure IP addressing until you can successfully see traffic captured on the laptop
computer. Whenever the desired number of packets have been captured, click Stop.
Figure 145: Ethereal Capture window