User guide

Managing Your Canopy Network March 2005
Through Software Release 6.1
Issue 1 Page 353 of 425
Canopy System User Guide
27.1.8 System Release 4.2.1 Features
Canopy System Release 4.2.1 introduced the following features:
◦ Software Limit Increase on 2.4-GHz Module (from 15 to 30 Miles)
◦ Settable AP Broadcast Repeat Count
◦ Encrypted Downlink Broadcast
◦ Protocol and Port Filtering
◦ Configurable Hyperlinked Logo
◦ Updated Canopy Enterprise MIB
◦ NAT Support for VPNs—L2TP Over IPSec
◦ SM and BHS Site Names in AP or BHM Sessions Page
◦ Graphical Spectrum Analyzer in SM and BHS
◦ PDA Info and Spectrum Analyzer Pages
◦ Telnet Commands Defined
◦ Web Pages Remain Scrolled
◦ Time & Date for APs or BHMs Connected to CMMmicro
Canopy System Release 4.2.1 also introduced the following fixes:
◦ BH 64-byte Packet Asynchronicity Fix
◦ Wrongly Reported DMZ IP Conflict with DHCP Server IP Range Fix
◦ SNMP Manager and SM Subnet Address Fix
27.1.9 System Release 4.2.2 Feature
Canopy System Release 4.2.2 introduced the following feature:
◦ 900-MHz Module (all P9) Support
27.1.10 System Release 4.2.3 Features and Fixes
Canopy System Release 4.2.3 introduced the following features:
◦ 5.7-GHz Module P9 Support
◦ New Alignment Tone for P9 Boards
◦ Floating Licenses for APs with Authentication
◦ Shorter than 32 Hex Authentication Keys Accepted
◦ CANOPYBOOT Version 3.0 Fix (Replaces Version 2.5)
◦ Dynamic Frequency Selection (DFS) for 5.7-GHz Module
◦ Improved Protocol and Port Filtering
◦ Consistent Display of FPGA as 6 digits
◦ Updated Canopy Enterprise MIB