User guide

March 2005 Managing Your Canopy Network
Through Software Release 6.1
Page 352 of 425 Issue 1
Canopy System User Guide
◦ Transmit Frame Spreading
◦ GPS Antenna Connection Status
◦ Improved Jitter Control
◦ Updated Canopy Enterprise MIB
◦ 20-Mbps BH to 10-Mbps BH Modulation
◦ Power Level Measurement
◦ Display Registered AP
◦ Registration Failed SM List
◦ No Remote Access
◦ Improved Received Signal Strength Indicator (RSSI)
◦ SM Scan Privacy
◦ Extended Network with Sync
27.1.4 System Release 4.0.1 Fixes
Canopy System Release 4.0.1 introduced the following fixes:
◦ Bus Bandwidth Limitation Causing 20-Mbps BH Errors Fix
◦ 20-Mbps BH Jitter Measurement Fix
27.1.5 System Release 4.0.2 Fixes
Canopy System Release 4.0.2 introduced the following fixes:
◦ Audible Alignment Tone on Only SMs and BHSs Fix
◦ ISM State Preserved through Reset to Factory Defaults Fix
27.1.6 System Release 4.0.4 Fix
Canopy System Release 4.0.4 introduced the following fix:
◦ Telnet Corrupting GPS Information Fix
27.1.7 System Release 4.1 Features
Canopy System Release 4.1 introduced the following features:
◦ SM Auto Update
◦ DHCP Server and Client in SM
◦ Demilitarized Zone (DMZ) in SM
◦ Updated Canopy Enterprise MIB
◦ Network Address Translation (NAT) in SM
◦ Low Power Mode (18-dB Reduction)
◦ Spectrum Analyzer in SM and BHS