User guide

Managing Your Canopy Network March 2005
Through Software Release 6.1
Issue 1 Page 335 of 425
Canopy System User Guide
26.3 INTERPRETING DATA IN THE SESSIONS PAGE (AP, BHM)
An example of the Sessions page is displayed in Figure 120.
Figure 120: Example Sessions page data
The Session web page provides information about each SM that has registered to the AP
(or about the BHS that has registered to the BHM). This information is useful for
managing and troubleshooting a Canopy system.
26.3.1 Sessions Parameters
The Sessions page provides the following parameters.
LUID
This field displays the LUID (logical unit ID) of the SM or BHS. The first module that
registers is assigned an LUID of 2. Each successive module that registers is assigned the
next successively higher number. A module that loses registration and then regains
registration retains the originally assigned LUID.

NOTE:
The LUID association is lost when a power cycle of the AP or BHM
occurs.
MAC
This field displays the MAC address (or electronic serial number) of the SM or BHS.