User guide

March 2005 Managing Your Canopy Network
Through Software Release 6.1
Page 312 of 425 Issue 1
Canopy System User Guide
5. Download a selected MIB viewer into directory mibviewer.
6. As instructed by the user documentation that supports your NMS, import the
eight MIB files that are listed above.
24.3 CONFIGURING MODULES FOR SNMP ACCESS
Canopy modules provide the following Configuration web page parameters that govern
SNMP access from the manager to the agent:
◦ Display-Only Access, which specifies the password that allows only viewing.
◦ Full Access, which specifies the password that allows both viewing and
changing.
◦ Community String, which specifies the password for security between
managers and the agent.
◦ Accessing Subnet, which specifies the subnet mask allows managers to poll the
agents.
◦ Trap Address, which specifies the IP address of the NMS.
For more information about each of these fields, see the user document that supports the
module.
24.4 OBJECTS DEFINED IN THE CANOPY ENTERPRISE MIB
The Canopy Enterprise MIB defines objects for
◦ APs and BH timing masters
◦ SMs and BH timing slaves
◦ CMMmicros

NOTE:
The 45-Mbps BH does not support these objects. The MIBs that this
module supports are listed under Objects Defined in the Canopy 45-
Mbps BH Module MIB on Page 324.
24.4.1 AP, SM, and BH Objects
The objects that the Canopy Enterprise MIB defines for each AP and BH Timing Master
are listed in Table 55.