User guide

Building Your Canopy Network March 2005
Through Software Release 6.1
Issue 1 Page 283 of 425
Canopy System User Guide
20 VERIFYING SYSTEM FUNCTIONALITY
To verify system functionality after the APs and or BHs have been installed, perform the
following steps.
Procedure 37: Verifying System Functionality
1. For each installed AP, use a computer connected to an SM set to a compatible
configuration (frequency and color code, for example) and verify link functionality.
2. For each BH installed, use a notebook computer connected to a BH (BHM or
BHS, as appropriate) set to a compatible configuration and verify link
functionality.
3. If a network data feed is present and operational, use an SM or BHS to verify
network functionality.
end of procedure