User guide

March 2005 Building Your Canopy Network
Through Software Release 6.1
Page 256 of 425 Issue 1
Canopy System User Guide
The calculation of transmitter output power is as follows:
Transmitter
Output
Power
=
EIRP
Patch
Antenna
Gain
Reflector
Gain
−−
s
olve, then set
in
p
aramete
r
f
rom applicable
regulations
from the following
table
f
rom the following
table
Table 44: Patch antenna and reflector gain
Gain
Frequency
Band Range
Patch
Antenna Reflector
2.4 GHz 8 dBi 11dBi
5.2, 5.4, or
5.7 GHz
7 dBi 18dBi