User guide

March 2005 Building Your Canopy Network
Through Software Release 6.1
Page 236 of 425 Issue 1
Canopy System User Guide
18.4.1 Configuration Page of the BHM
An example of a BHM Configuration screen is displayed in Figure 90.
Figure 90: Configuration screen, BHM
The Configuration web page contains all of the configurable parameters that define how
the module operates. The first line of information on the Configuration screen echoes the
Device Type from the Status web page.
You may set the Configuration page parameters as follows.
Device Information
This parameter indicates the frequency band of the module, whether this BH serves as
timing master or timing slave, and the MAC address of the module.