User guide

March 2005 Building Your Canopy Network
Through Software Release 6.1
Page 234 of 425 Issue 1
Canopy System User Guide
Management VID
Enter the VID that the SM should share with the AP. The range of values is 1 to 4095.
The default value is 1.
18.3 SETTING THE CONFIGURATION SOURCE
In Canopy System Release 6.1 and later releases, the AP includes a Configuration
Source parameter, which sets where SMs that register to the AP are controlled for MIR,
VLAN, the high-priority channel, and CIR as follows.
In a sector where Software Scheduling is implemented, the Configuration Source
parameter affects the source of
◦ all MIR settings:
− Sustained Uplink Data Rate
− Uplink Burst Allocation
− Sustained Downlink Data Rate
− Downlink Burst Allocation
◦ all SM VLAN settings:
− Dynamic Learning
− Allow Only Tagged Frames
− VLAN Aging Timeout
− Untagged Ingress VID
− Management VID
− VLAN Membership
In a sector where Hardware Scheduling is implemented, the Configuration Source
parameter affects the source of
◦ all MIR settings:
− Sustained Uplink Data Rate
− Uplink Burst Allocation
− Sustained Downlink Data Rate
− Downlink Burst Allocation
◦ all SM VLAN settings:
− Dynamic Learning
− Allow Only Tagged Frames
− VLAN Aging Timeout
− Untagged Ingress VID
− Management VID
− VLAN Membership
◦ the Hi Priority Channel setting
◦ all CIR settings
− Low Priority Uplink CIR
− Low Priority Downlink CIR